News & Events

QuickLinks

Meeting stricter emission standards in China with Dürr's exhaust-air purification systems

05/03/2016

The 1,000th Ecopure® TAR, produced by Dürr in Austria, will be installed at SAIC Volkswagen. The exhaust-air purification system has a length of 9.1 meters. Due to its size, insulation and add-on parts will be fitted till the system reaches China.

Milestone model of the Ecopure® TAR will go to SAIC Volkswagen
 

Zistersdorf/Yizheng, March 2016 – It's a milestone for the Ecopure® TAR exhaust-air purification system: Dürr has produced the 1,000th model at the Zistersdorf site in Austria. The mechanical and plant engineering firm has already delivered 1,800 TARs – between the 70s and 80s they were produced at Dürr's former headquarters in Stuttgart (Germany). The milestone model of this tried-and-tested and increasingly advanced technology for recuperative thermal oxidation will be used at SAIC Volkswagen (previously known as SVW). It ensures that the Chinese car manufacturer's emissions at the Yizheng plant comfortably meet the stricter standards. 

Since the provincial governments have made their regulations for clean air a lot more stringent, upgrades for exhaust-air purification systems in Chinese factories have become a key topic for almost all OEMs. This is why, two years ago, Dürr started a project to offer advice to customers, jointly develop customized solutions, and support them in the approval processes. More than sixty Ecopure® TARs have been ordered in the last two years alone. They are being installed in new facilities as well as during modernizations of existing paint shops in China.

The milestone model will be installed by a team of Chinese and German Dürr employees to upgrade an existing paint shop at SAIC Volkswagen. It will be used for the purification of exhaust air from spray booths. Usually the painting process generates particularly large volumes of exhaust air, which only contain low amounts of contaminants. For this reason, a continuous adsorption process for concentrating the solvent-laden exhaust air (Ecopure® KPR) should additionally be installed between the paint booth and the thermal exhaust-air purification system. The exhaust-air volume flow is thus significantly reduced for the subsequent thermal purification in the Ecopure® TAR.

The resulting increase in the pollutant concentration substantially decreases the gas consumption because the energy contained in the pollutants can be utilized in the oxidation process. The energy requirement for the exhaust-air purification process is therefore considerably lower. Combined with a system that recirculates up to 95 percent of the air, as is the case at SAIC Volkswagen with the EcoDryScrubber – Dürr's technology for dry separation of overspray – it reduces energy consumption by up to 60 percent compared to conventional systems. Unlike many of its competitors, Dürr produces its exhaust-air purification systems, KPR and TAR, in-house to ensure they work in perfect harmony.

Heat recovery

Further Dürr TAR systems are directly connected to the exhaust-air sources at SAIC Volkswagen. Recuperative oxidation systems are ideally suited to cleaning exhaust air from ovens, as the heating energy contained in the purified gases can be directly and almost completely reused in the drying process. As in all thermal processes, the exhaust air is heated by the Ecopure® TAR to such high temperatures that the hydrocarbons are oxidized to produce mainly water vapor and carbon dioxide. The polluted air is first preheated by the hot air in the integrated (recuperative) heat exchanger, which allows a large portion of the combustion heat to be recovered. When the air enters the combustion chamber, the burner heats it further and initiates oxidation of the pollutants, which is completed once they have passed through the chamber.

SAIC Volkswagen and other customers benefit from Dürr's decades of experience in exhaust-air purification and painting technology. "We deliver everything turn-key", says Magnus Morsch, Head of Sales for Exhaust-Air Purification Systems at Dürr's Clean Technology Systems division. Dürr produces the Ecopure® TAR entirely in-house, including burner and gas train. Several times a week, TAR systems leave the Zisterdorf plant as pre-assembled units, ready for their – often long – journeys all over the world. Aside from the automotive industry, they are also used in other sectors such as the coating industry.

______________________________________________________________________________________

The Dürr Group is one of the world's leading mechanical and plant engineering firms. Products, systems and services offered by Dürr enable highly efficient manufacturing processes in different industries. Business with automobile manufacturers and their suppliers accounts for approximately 60% of Dürr's sales. Other market segments include, for example, the mechanical engineering, chemical and pharmaceutical industries and – since the takeover of HOMAG Group AG in October 2014 – the woodworking industry. Dürr has 92 business locations in 28 countries. With 14,200 employees, the Group plans to generate sales revenues of € 3.4 - 3.5 billion in 2015. The Dürr Group operates in the market with five divisions:

• Paint and Final Assembly Systems: paint shops and final assembly systems for the automotive industry

• Application Technology: robot technologies for the automatic application of paint as well as sealants and adhesives

• Measuring and Process Systems: balancing and cleaning systems as well as testing and filling technology

• Clean Technology Systems: exhaust-air purification systems and energy-efficiency technology

• Woodworking Machinery and Systems: machinery and systems for the woodworking industry

_____________________________________________________________________________________________

Contact:
Dürr Systems GmbH
Clean Technology Systems
Magnus Morsch
Sales EMEA
Tel +49 7142 78 – 1736
Fax +49 7142 78 - 551647
E-Mail: magnus.morsch(at)durr.com


Dürr News