Energy efficiency improvement at PSA Peugeot Citroen Trnava thanks to optimized air pollution control
[Chinese] Bietigheim-Bissingen, 24 November 2011 – Sometimes, even the smallest changes have a big impact. Using this philosophy, Dürr, Environmental and Energy Systems has successfully optimized the existing air pollution control system at PSA Peugeot Citroen Trnava, Slovakia. The relatively straightforward and modest changes put forth by Dürr have reduced the combustion chamber temperature and decreased operating costs due to lower energy consumption while still complying with all PSA Trnava’s local emission level requirements.
In 2006, PSA Peugeot Citroën opened a new plant in Trnava, Slovakia, 45km from the capital, Bratislava. At this facility, the Peugeot 207 and the smallest of the PSA fleet, the Citroën C3 Picasso, are manufactured.
The air pollution control system in use at the time to abate emissions from PSA’s process no longer met required compliance limits. The system was outdated and PSA Peugeot Citroën knew a change was needed. Their hope was that with the proper investment and small, but strategic adjustments and improvements, the system could be reconditioned to become more efficient and cost effective. To meet these energy and efficiency demands, PSA Peugeot Citroën hired Dürr to rebuild and commission their existing regenerative thermal oxidizer air pollution control system.
Regenerative systems for thermal oxidation are characterized by limited use of primary energy, assuming the system design allows for this. In the case of PSA, the substructure, meaning the air distribution system, was being replaced.
The duct system, specifically designed and engineered by Dürr, ensures an extensive inflow of air and greatly improves its distribution in the substructure. The shut-off valves in use were also replaced by Dürr-patented poppet valves. The internal poppet valves were installed at the side and are thus easily accessible and maintainable. The pneumatic cylinders were installed to protect them from the weather. The control devices installed on the outside have a removable weather protection hood. As a result, these are well-protected from contamination.
These design modifications have had an enormous effect on the system’s efficiency. The combustion chamber temperature has been reduced from 930°C to 800°C, thereby significantly reducing energy costs.
These type of modifications require only one thing; the system must have a modular design so that the bottom can be easily exchanged. For PSA Trnava, this characteristic was not a problem.
While these system upgrades seem relatively specific, cost saving modifications like the ones made for PSA Trnava can be made in all air pollution control systems with shut-off valves that flow into the bottom bed from one side. These types of projects prove that sometimes the smallest improvements add up to huge results.
Dürr is a world leading mechanical and plant engineering group within its areas of activity. It generates a good 80% of its sales in business with the automotive industry. Dürr furthermore supplies sectors such as the aircraft, machinery, chemical, and pharmaceutical industries with innovative production and environmental technology.
The Dürr Group operates in the market with three divisions: The Paint and Assembly Systems division supplies production and painting technology, especially for car bodies. Machinery and systems from the Measuring and Process Systems division are used in engine and transmission manufacturing and in final vehicle assembly, among other areas. The third division, Clean Technology Systems, focuses on ways to improve energy efficiency and air pollution control. Worldwide, Dürr has 48 business locations in 21 countries. In fiscal 2010, the Dürr Group, which employs about 5,900 people, generated sales revenues of € 1.26 bn.
Dürr Systems GmbH
After Market Sales
Phone: +49 7142 78 2028
Fax: + 49 7142 78 1075