新闻与事件

QuickLinks

Beijing Benz Automotive expanding production capacities with sustainable paint shop from Dürr

11/06/2017

Ergonomic and friendly workplaces for the final vehicle inspection after top coat application.

Bietigheim-Bissingen,
November 6th, 2017

The new paint shop of Beijing Benz Automotive Co, Ltd. (BBAC) meets the highest standards for environmentally friendly production and air pollution control. The compact system design, the resource-efficient painting technology, and efficient exhaust air purification all contribute to this. What is notable about the major project, where Dürr was the general contractor, is also the speed of commissioning: the entire paint shop was launched in September 2017 four weeks earlier than originally planned.

China is increasingly reconciling economic dynamism and environmental protection. Its aim in doing so is to improve the air quality in major cities with low-emission production processes. This is also true of Beijing, the location of BBAC’s recently commissioned paint shop. That is why the German-Chinese automotive joint venture focused on two environmental issues from the beginning: high energy efficiency during production and efficient exhaust air purification.

In the new paint shop, which has an hourly throughput of 30 vehicles, BBAC is using the Integrated Paint Process (IP2) which has been tried and tested at Mercedes-Benz. This process eliminates the application and baking of the primer, since it is integrated into the base coat. This reduces emissions and energy consumption significantly. It also makes for a more compact system design, since the entire primer line including the associated oven is not needed. This saves infrastructure space and already lowers energy consumption and CO2 emissions during the construction Phase.

15 robots of the type EcoRS 16 and EcoRS30 L16 from Dürr in use at seam sealing and insulation application. 

Energy savings of up to 60%
The technology is also designed for sustainability in the PT/ED phase. The RoDip rotational system used during pretreatment and cathodic dip-coating eliminates entry and exit inclines as the car bodies are introduced at a steep angle and rotated through 360°. This enables shorter dip tanks, which need less water and energy as well as fewer chemicals for the initial fill and during operation. BBAC is also using an environmentally friendly solution in the spray booths with water-based paints applied by painting robots using the EcoBell2 high-speed rotating atomizers. With its flexible spray jet setting, the EcoBell2 can handle different painting tasks with the best quality and – thanks to the high degree of transfer efficiency during application – economically. Any paint overspray is separated in a ressource saving manner. The dry separation system EcoDryScrubber binds the overspray with limestone powder in a process involving no water or chemicals. This means that the painting booth can be operated with 80% recirculated air, which in turn lowers air conditioning costs and offers energy savings of up to 60%.

Heating ovens with exhaust air
BBAC is also setting standards when it comes to emission control. The painting booth is equipped with Dürrs’ compact exhaust air purification system for removing the solvents (VOC) from the exhaust air. Due to the booth air recirculation, the exhaust air requiring abatement is already concentrated. The Ecopure(R) KPR VOC concentrator system, combined with a downstream thermal oxidizer, the Ecopure(R) TAR, allows for highly efficient VOC removal. This combination reduces the size of the thermal oxidizer by 80% compared to conventional VOC abatement systems connected to spray booths without air recirculation. The exhaust air from the ovens is abated by the Ecopure(R) TAR, an integral afterburning system with heat recovery, and is then reused for heating the oven.

The new paint shop is the second contract from BBAC. Dürr constructed a first paint shop in Beijing in fall 2015, just three miles away from the new one. The lessons learned during this project, the synergies in planning and execution, and largely identical project teams on both sides ensured such a smooth process that the start of production for the second project was achieved much earlier than planned.

 

The Dürr Group is one of the world's leading mechanical and plant engineering firms with outstanding automation expertise. Products, systems and services offered by the Group enable highly efficient manufacturing processes in different industries. Dürr supplies sectors like the automotive industry, the mechanical engineering, chemical and pharmaceutical industries, and the woodworking industry. The company has 86 business locations in 28 countries. The Group generated sales of € 3.57 billion in 2016. Dürr has around 14,900 employees and operates in the market with five divisions:

  • Paint and Final Assembly Systems: paint shops and final assembly systems for the automotive industry
  • Application Technology: robot technologies for the automated application of paint, sealants and adhesives
  • Clean Technology Systems: exhaust-air purification systems and energy efficiency technology
  • Measuring and Process Systems: balancing equipment as well as assembly, testing and filling technology
  • Woodworking Machinery and Systems: machinery and equipment for the woodworking industry

Contact:
Dürr Systems AG
Günter Buzer
Marketing Paint and Final Assembly Systems

Phone +49 7142 78-2614
E-mail: guenter.buzer(at)durr.com
www.durr.com 


Dürr News